ABOUT US

About us

We take machines apart so you don’t have to

Gears & Girders explains how the machines, vehicles, structures and energy systems around us really work, with clear diagrams, small interactive tools and plain-English answers.

Last updated November 20, 2026Independent projectBased in Spain4 min read
Our missionMake engineering make senseAnswer the everyday ‘how does that work?’ questions properly, without jargon.
How we workSources, drawings, toolsEvery guide pairs checked facts with a labelled diagram and something you can try.
Who we areEngineer-led and independentA small editorial team led by a mechanical engineer. No sponsors decide what we write.

01Why Gears & Girders exists

Most of the technology we rely on is hidden behind a panel: the gearbox under the floor, the pump inside the dishwasher, the steel inside a bridge deck. Explanations online tend to be either too vague to be useful or written for specialists.

We started Gears & Girders to sit in between. Each guide answers one real question, the kind people actually type into a search bar, and goes as deep as it needs to without losing a curious reader on the way.

02What we cover

The site is organised in six sections, and new guides are added every week.

Machines and MechanismsGears, locks, pumps and the clever parts hiding inside everyday machines.
Cars and TransportBrakes, gearboxes, tyres, trains and planes, explained from the inside out.
Structures and ConstructionBridges, towers, tunnels and roads, and the forces they quietly fight every day.
Energy and ElectricityBatteries, solar panels, wind turbines and the grid that gets power to your plug.
Everyday ScienceThe physics and chemistry behind small things you notice every day.
Engineering HistoryHow people built canals, towers and engines long before computers did the maths.

03How every guide is built

You always know where to look, because every guide follows the same blueprint:

  1. Short answer. Two or three sentences that answer the question straight away.
  2. Labelled diagram. A clean drawing of our own, with every part named and readable on a phone.
  3. Key numbers. Real figures in metric and imperial units, each linked to its source.
  4. Interactive tool. A small calculator or simulator so you can change one thing and see what happens.
  5. FAQ and sources. Follow-up questions answered, and a list of where every fact comes from.

The full process is described on our How we research page.

04Who is behind it

Gears & Girders is an independent project run from Spain by a small editorial team. Its editor is a mechanical engineer with a master’s degree in automotive engineering and professional experience in vehicle development and manufacturing, so explaining how machines work is part of the day job.

Guides are published under the name Gears & Girders Editorial Team. That means the whole team stands behind each page: one person researches and drafts, and every figure is checked against its source before publication.

05What we are not

  • Not a repair manual. We explain how things work; we do not give step-by-step instructions for repairing gas, electrical, pressurised or structural systems.
  • Not professional engineering advice. Our guides are general education. Decisions about a specific building, vehicle or installation belong with a qualified professional.
  • Not a way around safety. We never explain how to defeat a lock, a safety device or a protection system.
  • Not for sale. No company pays to appear in our guides or to influence what we say.

06Our promises to you

  • Every number is sourced, and the source is linked at the end of the guide.
  • If we cannot verify a claim, including popular ones from viral videos, we leave it out.
  • Interactive tools state their assumptions, and simplified models are labelled as illustrative.
  • Each guide shows the date it was last reviewed, and confirmed errors are corrected quickly.
  • Advertising, when shown, is always kept separate from our content.
Have a question you want answered?

Suggest a topic or point out something we got wrong. We read every message.

Get in touch